Top 10 usual forklift crashes ， forklift procedure must take notice of these issues ！.

Do not ignore the forklift at the workplace. If the operation is bad, there will be serious mishaps in minutes, and there are several crashes entailing forklifts.

Case 1: The forklift freight obstructed the driver's sight, and the person in front might not be discovered, leading to a rolling accident.
Case 2: In order to maintain the balance of the forklift when raising hefty items, the staff members utilized their body weight as the weight, which nearly triggered casualties.
Situation 3: The width of the forklift cargo goes beyond the allowed size of the path and hangs on the roadside shelf, which almost causes an crash.
Instance 4: Forklift is speeding up and rolls over during a turn.
Instance 5: The forklift motorist did not observe the pedestrian, and the pedestrian did not discover the forklift.
Case 6: The forklift lifts the employees unlawfully, the forklift motorist does not wear the safety belt, the forklift lifter drops and the chauffeur is crushed when the forklift surrender.
Situation 7: The forklift chauffeur did not put on a safety belt and fell from the lorry when it surrendered and was crushed.
Forklift procedure ought to take note of these issues ：.

Begin.
1. Before beginning, observe the surroundings, and after validating that there are no challenges that hinder the safety and security of driving, honk the horn first and after that start.
2. For lorries with hydraulic (air pressure) brakes, the brake hydraulic stress (air pressure) scale should be secure before beginning.
3. When the forklift starts with a load, the vehicle driver ought to initially verify that the lots is stable and reliable.
4. The begin must be sluggish and consistent.

Driving.
1. When driving, the elevation in between the bottom end of the fork and the ground must be maintained 300mm-400mm, and the pole needs to be tilted backwards. .
2. Do not raise the fork too high when driving. When getting in and leaving the job site or while driving, take care that there will be no challenges overhead. When the load is traveling, the fork needs to not be elevated too high, which will certainly influence the stability of the forklift. .
3. After discharging, the fork must be lowered to the normal driving setting prior to driving. .
4. When transforming, if there are pedestrians or vehicles nearby, the driving signal needs to be issued first. High-speed sharp turns are forbidden. High-speed doglegs will cause the car to shed side stability and topple. .
5. When the forklift is downhill, it is strictly forbidden to turn off the flame and slide, and it is forbidden to brake all of a sudden while driving with lots unless there are unique situations.
6. When the forklift is running, it needs to comply with the website traffic rules in the factory and must maintain a certain security distance from the lorry in front. .
7. When the forklift is running, the tons must be in the lowest placement that does not prevent the driving, and the gantry should be properly slanted back. The tons will not be raised other than when piling or packing. .
8. The elevation of the tons have to not block the vehicle driver's sight. In special circumstances, when the item affects the forward vision, drive at a reduced speed when reversing.
9. It is prohibited to turn on the ramp, neither to drive throughout the ramp. .
10. The secure driving rate of the forklift in the factory location is 5 km/h, and it should drive safely at a reduced speed when entering the production workshop location. .
11. When the forklift is raised, lifted or driven, it is restricted for employees to base on the fork to hold things and play a balancing duty. .
12. If issues are discovered, they will be repaired and reported in a prompt fashion, and they will never ever operate with diseases or hide them.

filling and discharging.
1. When fork-loading products, the distance between the two forks ought to be changed as required to make the lots of the two forks balanced and not manipulated, and one side of the thing ought to protest the shelf. .
2. It is forbidden to deal with a single fork or use a fork top or pull. In special conditions, security indication should be set up to remind surrounding pedestrians. .
3. In the process of loading and unloading things, the forklift must be braked with the brake. .
4. The rate of the car need to be slow-moving and constant. Beware not to roll the wheels on the dunnage, so as not to stretch the rolled objects and injure individuals. .
5. When making use of a fork to fork the goods, the fork needs to be as deep as possible under the lots, and it ought to be kept in mind that the fork idea must not touch other goods or things. The lots must be maintained with marginal back tilt of the gantry so that the load does not move backwards. The pole can be tilted forward somewhat when the lots is reduced to permit easy positioning of the lots and extraction of the forks. .
6. It is restricted to fork products at high speed and hit difficult objects with the fork head. .
7. When the forklift is working, it is restricted for people to stand around the fork, so as to stay clear of the collapse of the goods and injure people. .
8. Overloading is banned, and it is banned to make use of forks to raise workers to participate in high-altitude operations to avoid high-altitude dropping crashes. .
9. It is not permitted to utilize the brake inertia to slip, place, round or roll things. .
10. It is not enabled to use forks to pick, transform pallet discharge.

Leaving .
1. It is prohibited to leave the forklift when the items on the fork impend. Before leaving the forklift, you must dump the goods or lower the fork structure.
2. Draw the emergency brake deal with to dead or dispirit the emergency brake button.
3. The engine is shut off and the power is removed. (Except for special circumstances, such as the vehicle driver does not leave the car's view and does not surpass 1 minute).
4. Get rid Electric Forklift Truck for Warehouse of the key. .

Forklift Operation Precautions.
1. Prior to and after the forklift procedure, the appearance must be checked, and fuel, lubing oil and air conditioning water ought to be included.
2. Examine the security efficiency of starting, running and stopping.
3. Examine whether the lights and horn signals are full and efficient.
4. During the operation of the forklift, inspect whether Electric Forklift Truck for Warehouse the pressure and temperature are regular.
5. After the forklift is running, the exterior leakage should additionally be checked and the seals should be replaced in time.

Forklift Safety Operation Specifications.
1. You must check prior to leaving the car;.
2. When you run into a person in front of you during driving, you must send out a signal at a distance of 5 m;.
3. The driving rate in the manufacturing facility does not exceed 5 km/h;.
4. When driving, the nadir of the cargo need to be 0.3 m ~ 0.4 m in the air;.
5. The transforming must not be also sharp to avoid the propensity of " complimentary switching";.
6. Running up and down the incline needs to be sluggish and consistent, and no activating the slope is enabled.
7. Do not drive across the slope. When the gradient is more than 10%, the automobile ought to be driven in reverse when worsening;.
8. When the forklift personnel bring the goods and move on, if they encounter big or heavy products and most likely to the motorist's line of sight, they must take the turning around exercise
.
The "Eight Prohibitions" need to be followed in the procedure.
1. Solitary fork operation is not permitted.
2. It is not allowed to lift the goods for cross country driving.
3. It is not allowed to get the goods by passing on the pallet with the fork.
4. It is not allowed to straight shovel chemicals, flammables and various other dangerous chemicals with forks.
5. It is not enabled to make use of inertia force to get the goods.
6. It is not permitted to use braking force to expatriation round or easy-to-roll things.
7. It is not allowed to bring people to work with the pallet or fork, and it is purely forbidden to stand under the fork after the fork is increased.
8. Do not drive side to side on inclines
.
Vehicle parking is not allowed under the list below problems.
1. Curves, narrow roads, railway crossings;.
2. Sections with a longitudinal incline more than 5%.
3. When there is an obstacle on one side of the road, the opposite side of the section with the exact same length as the challenge need to be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844